Non Woven Abrasive Deburr and Finish Wheels 6" x 1/2" x 1" , Density: 9, Grit: F, Abrasive: S

Buy Best Non Woven Abrasive Deburr and Finish Wheels 6" x 1/2" x 1" , Density: 9, Grit: F, Abrasive: S

Compare Prices from Amazon.com

Over 25$ Free shipping

About Shipping at checkout Details.

Non Woven Abrasive Deburr and Finish Wheels 6" x 1/2" x 1" , Density: 9, Grit: F, Abrasive: S - Best Deal with abrasive wheels

Applications: A dense product available in four different densities, two minerals and two grit sizes to cover a wide range of deburring, blending, polishing and finishing applications. Major applications include: * General deburring * Polishing stainless steel cutlery * Polishing golf clubs * Blending coated abrasive scratch patterns * Edge radiusing * MAX RPM: 6,000 M = Medium F = Fine VF = Very Fine S = Silicon A = Aluminum Oxide

See more Details & Compare Prices
(Non Woven Abrasive Deburr and Finish Wheels 6" x 1/2" x 1" , Density: 9, Grit: F, Abrasive: S)
Product Information and Prices Stored : Oct 08, 2012 13:04:10
If this Information is Not Updated, Please Check!!!(Non Woven Abrasive Deburr and Finish Wheels 6" x 1/2" x 1" , Density: 9, Grit: F, Abrasive: S)

Scotch-Brite EXL-XP Deburring Wheel, Silicon Carbide, 6000 rpm, 6" Diameter, 1" Arbor, 10S Fine Grit (Pack of 1)

Buy Best Scotch-Brite EXL-XP Deburring Wheel, Silicon Carbide, 6000 rpm, 6" Diameter, 1" Arbor, 10S Fine Grit (Pack of 1)

Scotch-Brite EXL-XP Deburring Wheel, Silicon Carbide, 6000 rpm, 6" Diameter, 1" Arbor, 10S Fine Grit (Pack of 1) - Best Deal with abrasive wheels

High performance firm and durable wheel for demanding deburring and finishing applications. Convolutely wound on a core. Hard 10 density for durability on tough burrs. Abrasive mineral: fine grade silicon carbide. For deburring and finishing Longest lasting EXL deburring wheel. Center hole diameter: 1". Density: 10. Grade: Fine. Max RPM: 6000. 6" Diameter. 1" Width. Gray color.

Compare Prices from Amazon.com

Over 25$ Free shipping

Features :Scotch-Brite EXL-XP Deburring Wheel, Silicon Carbide, 6000 rpm, 6" Diameter, 1" Arbor, 10S Fine Grit (Pack of 1) (abrasive wheels)

• For deburring and finishing Longest lasting EXL deburring wheel

See more Details & Compare Prices
(Scotch-Brite EXL-XP Deburring Wheel, Silicon Carbide, 6000 rpm, 6" Diameter, 1" Arbor, 10S Fine Grit (Pack of 1))
Product Information and Prices Stored : Oct 08, 2012 13:03:12
If this Information is Not Updated, Please Check!!!(Scotch-Brite EXL-XP Deburring Wheel, Silicon Carbide, 6000 rpm, 6" Diameter, 1" Arbor, 10S Fine Grit (Pack of 1))

50pk Mounted Flap Wheels 2" x 1" x 1/4" -120 Grit Use: Our 48718 are designed for light finishing work,deburring and flash removal. The flap design allow the wheels to contour around the work piece to smooth the surface. As the flaps wears away, new abrasive grain is exposed allowing the wheel to continue to cut. Ideal for general purpose cleaning,deburring,polishing and blending.Excellent on wood,stainless steel,steel,aluminum,plastic,fibeglass,etc. Product SKU: 5077-Ee

Buy Cheap 50pk Mounted Flap Wheels 2" x 1" x 1/4" -120 Grit Use: Our 48718 are designed for light finishing work,deburring and flash removal. The flap design allow the wheels to contour around the work piece to smooth the surface. As the flaps wears away, new abrasive grain is exposed allowing the wheel to continue to cut. Ideal for general purpose cleaning,deburring,polishing and blending.Excellent on wood,stainless steel,steel,aluminum,plastic,fibeglass,etc. Product SKU: 5077-Ee

Compare Prices from Amazon.com

Over 25$ Free shipping

About Shipping at checkout Details.

50pk Mounted Flap Wheels 2" x 1" x 1/4" -120 Grit Use: Our 48718 are designed for light finishing work,deburring and flash removal. The flap design allow the wheels to contour around the work piece to smooth the surface. As the flaps wears away, new abrasive grain is exposed allowing the wheel to continue to cut. Ideal for general purpose cleaning,deburring,polishing and blending.Excellent on wood,stainless steel,steel,aluminum,plastic,fibeglass,etc. Product SKU: 5077-Ee - Best Deal with abrasive wheels

Designed for fast polishing, de-burring, and material removal in hard to reach internal work areas. The flaps wear away, continually exposing fresh abrasive and providing a uniform and consistent operation. Available in a number of sizes and aluminum oxide grits.

Features :50pk Mounted Flap Wheels 2" x 1" x 1/4" -120 Grit Use: Our 48718 are designed for light finishing work,deburring and flash removal. The flap design allow the wheels to contour around the work piece to smooth the surface. As the flaps wears away, new abrasive grain is exposed allowing the wheel to continue to cut. Ideal for general purpose cleaning,deburring,polishing and blending.Excellent on wood,stainless steel,steel,aluminum,plastic,fibeglass,etc. Product SKU: 5077-Ee (abrasive wheels)

• Product SKU: 5077-EeWeight: Approximately 6.94 lbs.Use: Our Flap Wheels are designed for light finishing work,deburring and flash removal. The flap design allow the wheels to contour around the work piece to smooth the surface. As the flaps wears away, new abrasive grain is exposed allowing the wheel to continue to cut. Ideal for general purpose cleaning,deburring,polishing and blending.Excellent on wood,stainless steel,steel,aluminum,plastic,fibeglass,etc.Material: Aluminum Oxide
• Dimensions: 2" x 1" x 1/4"Includes: Other:
• Shipping & Shipping ChargesHeleta reserves the rights to choose the final delivery method for items shipping ground. We ship most orders the same day if they're received before 12:00 noon CST.
• Heleta will refund the purchase price for any UNUSED item within 30 days of the purchase date. To make a return, please ship the item back with a copy of your receipt. The customer is responsible for all shipping fees unless the mistake was ours.
• Heleta will refund the purchase price for any UNUSED item within 30 days of the purchase date. To make a return, please ship the item back with a copy of your receipt. The customer is responsible for all shipping fees unless the mistake was Heleta's.

See more Details & Compare Prices
(50pk Mounted Flap Wheels 2" x 1" x 1/4" -120 Grit Use: Our 48718 are designed for light finishing work,deburring and flash removal. The flap design allow the wheels to contour around the work piece to smooth the surface. As the flaps wears away, new abrasive grain is exposed allowing the wheel to continue to cut. Ideal for general purpose cleaning,deburring,polishing and blending.Excellent on wood,stainless steel,steel,aluminum,plastic,fibeglass,etc. Product SKU: 5077-Ee)
Product Information and Prices Stored : Oct 08, 2012 13:02:07
If this Information is Not Updated, Please Check!!!(50pk Mounted Flap Wheels 2" x 1" x 1/4" -120 Grit Use: Our 48718 are designed for light finishing work,deburring and flash removal. The flap design allow the wheels to contour around the work piece to smooth the surface. As the flaps wears away, new abrasive grain is exposed allowing the wheel to continue to cut. Ideal for general purpose cleaning,deburring,polishing and blending.Excellent on wood,stainless steel,steel,aluminum,plastic,fibeglass,etc. Product SKU: 5077-Ee)

Non Woven Abrasive Clean and Finish Wheels- Convoute Wheels 6" x 2" x 1" Medium Grit, Max RPM: 3,000

Buy New Non Woven Abrasive Clean and Finish Wheels- Convoute Wheels 6" x 2" x 1" Medium Grit, Max RPM: 3,000

Compare Prices from Amazon.com

Over 25$ Free shipping

About Shipping at checkout Details.

Non Woven Abrasive Clean and Finish Wheels- Convoute Wheels 6" x 2" x 1" Medium Grit, Max RPM: 3,000 - Best Deal with abrasive wheels

Silicon Carbide Abrasive Applications: An open mesh product for cleaning and finishing operations. Those wheels are: * Used with light/ moderate pressure * Low speed * Not to be used for deburring Major applications include: * General clean up * Removal of rust and oxide * Applying decorative contrast finishes * Blending weld areas or stainless to a #4 mil finish BUSHINGS FOR THESE PRODUCTS AVAILABLE( SEE REDUCING BUSHINGS FOR CONVOLUTE & FLAP WHEELS) LARGER SIZES AVAILABLE; PLEASE INQUIRE

See more Details & Compare Prices
(Non Woven Abrasive Clean and Finish Wheels- Convoute Wheels 6" x 2" x 1" Medium Grit, Max RPM: 3,000)
Product Information and Prices Stored : Oct 08, 2012 13:01:04
If this Information is Not Updated, Please Check!!!(Non Woven Abrasive Clean and Finish Wheels- Convoute Wheels 6" x 2" x 1" Medium Grit, Max RPM: 3,000)

Non Woven Abrasive Clean and Finish Wheels- Convoute Wheels 8" x 2" x 3" Medium Grit, Max RPM: 2,550

Buy Cheap Non Woven Abrasive Clean and Finish Wheels- Convoute Wheels 8" x 2" x 3" Medium Grit, Max RPM: 2,550

Non Woven Abrasive Clean and Finish Wheels- Convoute Wheels 8" x 2" x 3" Medium Grit, Max RPM: 2,550 - Best Deal with abrasive wheels

Silicon Carbide Abrasive Applications: An open mesh product for cleaning and finishing operations. Those wheels are: * Used with light/ moderate pressure * Low speed * Not to be used for deburring Major applications include: * General clean up * Removal of rust and oxide * Applying decorative contrast finishes * Blending weld areas or stainless to a #4 mil finish BUSHINGS FOR THESE PRODUCTS AVAILABLE( SEE REDUCING BUSHINGS FOR CONVOLUTE & FLAP WHEELS) LARGER SIZES AVAILABLE; PLEASE INQUIRE

Compare Prices from Amazon.com

Over 25$ Free shipping

See more Details & Compare Prices
(Non Woven Abrasive Clean and Finish Wheels- Convoute Wheels 8" x 2" x 3" Medium Grit, Max RPM: 2,550)
Product Information and Prices Stored : Oct 08, 2012 13:00:04
If this Information is Not Updated, Please Check!!!(Non Woven Abrasive Clean and Finish Wheels- Convoute Wheels 8" x 2" x 3" Medium Grit, Max RPM: 2,550)

AA Aluminum Oxide Abrasive Toolroom Grinding Wheels 10" x 1" x 3" AA46 J8 V40 Grading, Type 1, Max RPM: 2,485

Buy Cheap AA Aluminum Oxide Abrasive Toolroom Grinding Wheels 10" x 1" x 3" AA46 J8 V40 Grading, Type 1, Max RPM: 2,485

AA Aluminum Oxide Abrasive Toolroom Grinding Wheels 10" x 1" x 3" AA46 J8 V40 Grading, Type 1, Max RPM: 2,485 - Best Deal with abrasive wheels

For Medium- to Grinding Steels Type 1 - For Surface Type 5 For Surface Grinders Type 6 For Tool and Cutter Grinders Type 11 For Tool and Cutter Grinders Type 12 For Tool and Cutter Grinders Application: AA is ideal for grinding heat sensitive steel, as well as easy and medium to grind high speed steels. * Use V40 bond for general purpose applications or medium contact areas. * Use V40P bond on wide contact areas where heat is an issue.

Compare Prices from Amazon.com

Over 25$ Free shipping

See more Details & Compare Prices
(AA Aluminum Oxide Abrasive Toolroom Grinding Wheels 10" x 1" x 3" AA46 J8 V40 Grading, Type 1, Max RPM: 2,485)
Product Information and Prices Stored : Oct 08, 2012 12:59:03
If this Information is Not Updated, Please Check!!!(AA Aluminum Oxide Abrasive Toolroom Grinding Wheels 10" x 1" x 3" AA46 J8 V40 Grading, Type 1, Max RPM: 2,485)

Non Woven Abrasive Clean and Finish Wheels- Convoute Wheels 6" x 1" x 1" Medium Grit, Max RPM: 3,000

Buy Cheap Non Woven Abrasive Clean and Finish Wheels- Convoute Wheels 6" x 1" x 1" Medium Grit, Max RPM: 3,000

Non Woven Abrasive Clean and Finish Wheels- Convoute Wheels 6" x 1" x 1" Medium Grit, Max RPM: 3,000 - Best Deal with abrasive wheels

Silicon Carbide Abrasive Applications: An open mesh product for cleaning and finishing operations. Those wheels are: * Used with light/ moderate pressure * Low speed * Not to be used for deburring Major applications include: * General clean up * Removal of rust and oxide * Applying decorative contrast finishes * Blending weld areas or stainless to a #4 mil finish BUSHINGS FOR THESE PRODUCTS AVAILABLE( SEE REDUCING BUSHINGS FOR CONVOLUTE & FLAP WHEELS) LARGER SIZES AVAILABLE; PLEASE INQUIRE

Compare Prices from Amazon.com

Over 25$ Free shipping

See more Details & Compare Prices
(Non Woven Abrasive Clean and Finish Wheels- Convoute Wheels 6" x 1" x 1" Medium Grit, Max RPM: 3,000)
Product Information and Prices Stored : Oct 08, 2012 12:58:12
If this Information is Not Updated, Please Check!!!(Non Woven Abrasive Clean and Finish Wheels- Convoute Wheels 6" x 1" x 1" Medium Grit, Max RPM: 3,000)

AA Aluminum Oxide Abrasive Toolroom Grinding Wheels 8" x 1/2"x 1 -1/4" AA80-JV40 Grading, Type 1, Max RPM: 3,600

Cheap Deals AA Aluminum Oxide Abrasive Toolroom Grinding Wheels 8" x 1/2"x 1 -1/4" AA80-JV40 Grading, Type 1, Max RPM: 3,600

Compare Prices from Amazon.com

Over 25$ Free shipping

About Shipping at checkout Details.

AA Aluminum Oxide Abrasive Toolroom Grinding Wheels 8" x 1/2"x 1 -1/4" AA80-JV40 Grading, Type 1, Max RPM: 3,600 - Best Deal with abrasive wheels

For Medium- to Grinding Steels Type 1 - For Surface Type 5 For Surface Grinders Type 6 For Tool and Cutter Grinders Type 11 For Tool and Cutter Grinders Type 12 For Tool and Cutter Grinders Application: AA is ideal for grinding heat sensitive steel, as well as easy and medium to grind high speed steels. * Use V40 bond for general purpose applications or medium contact areas. * Use V40P bond on wide contact areas where heat is an issue.

See more Details & Compare Prices
(AA Aluminum Oxide Abrasive Toolroom Grinding Wheels 8" x 1/2"x 1 -1/4" AA80-JV40 Grading, Type 1, Max RPM: 3,600)
Product Information and Prices Stored : Oct 08, 2012 12:57:08
If this Information is Not Updated, Please Check!!!(AA Aluminum Oxide Abrasive Toolroom Grinding Wheels 8" x 1/2"x 1 -1/4" AA80-JV40 Grading, Type 1, Max RPM: 3,600)

Portable Premier Red Zirconia Alumina Abrasive Cup Wheels 6/4-3/4 2ZA14-QB64 Grading, Max RPM: 6,000, S

Buy Cheap Portable Premier Red Zirconia Alumina Abrasive Cup Wheels 6/4-3/4 2ZA14-QB64 Grading, Max RPM: 6,000, S

Portable Premier Red Zirconia Alumina Abrasive Cup Wheels 6/4-3/4 2ZA14-QB64 Grading, Max RPM: 6,000, S - Best Deal with abrasive wheels

For Metal/ Steel Application: Best choice for grindinng steel, steel alloys and cast rion. Used for grinding weld seams, cleaning metal before welding, grinding off fins and parting lines, smoothing surfaces on castings and smoothing surfaces before painting or plating. FS = Fully Steel Back Bushing S = Standard Back Bushing

Compare Prices from Amazon.com

Over 25$ Free shipping

See more Details & Compare Prices
(Portable Premier Red Zirconia Alumina Abrasive Cup Wheels 6/4-3/4 2ZA14-QB64 Grading, Max RPM: 6,000, S)
Product Information and Prices Stored : Oct 08, 2012 12:56:08
If this Information is Not Updated, Please Check!!!(Portable Premier Red Zirconia Alumina Abrasive Cup Wheels 6/4-3/4 2ZA14-QB64 Grading, Max RPM: 6,000, S)

Portable Premier Red Zirconia Alumina Abrasive Cup Wheels 5/3-3/4 2ZA16 QB64 Grading, Max RPM: 7,260, S

Cheap Deals Portable Premier Red Zirconia Alumina Abrasive Cup Wheels 5/3-3/4 2ZA16 QB64 Grading, Max RPM: 7,260, S

Listprice :

Price: Check Special Offers !!! (Portable Premier Red Zirconia Alumina Abrasive Cup Wheels 5/3-3/4 2ZA16 QB64 Grading, Max RPM: 7,260, S)

Compare Prices from Amazon.com

Over 25$ Free shipping

About Shipping at checkout Details.

Portable Premier Red Zirconia Alumina Abrasive Cup Wheels 5/3-3/4 2ZA16 QB64 Grading, Max RPM: 7,260, S - Best Deal with abrasive wheels

For Metal/ Steel Application: Best choice for grindinng steel, steel alloys and cast rion. Used for grinding weld seams, cleaning metal before welding, grinding off fins and parting lines, smoothing surfaces on castings and smoothing surfaces before painting or plating. FS = Fully Steel Back Bushing S = Standard Back Bushing

See more Details & Compare Prices
(Portable Premier Red Zirconia Alumina Abrasive Cup Wheels 5/3-3/4 2ZA16 QB64 Grading, Max RPM: 7,260, S)
Product Information and Prices Stored : Oct 08, 2012 12:55:07
If this Information is Not Updated, Please Check!!!(Portable Premier Red Zirconia Alumina Abrasive Cup Wheels 5/3-3/4 2ZA16 QB64 Grading, Max RPM: 7,260, S)

Non Woven Abrasive Deburr and Finish Wheels 6" x "1 x 1" , Density: 9, Grit: M, Abrasive: S

Cheap Deals Non Woven Abrasive Deburr and Finish Wheels 6" x "1 x 1" , Density: 9, Grit: M, Abrasive: S

Compare Prices from Amazon.com

Over 25$ Free shipping

About Shipping at checkout Details.

Non Woven Abrasive Deburr and Finish Wheels 6" x "1 x 1" , Density: 9, Grit: M, Abrasive: S - Best Deal with abrasive wheels

Applications: A dense product available in four different densities, two minerals and two grit sizes to cover a wide range of deburring, blending, polishing and finishing applications. Major applications include: * General deburring * Polishing stainless steel cutlery * Polishing golf clubs * Blending coated abrasive scratch patterns * Edge radiusing * MAX RPM: 6,000 M = Medium F = Fine VF = Very Fine S = Silicon A = Aluminum Oxide

See more Details & Compare Prices
(Non Woven Abrasive Deburr and Finish Wheels 6" x "1 x 1" , Density: 9, Grit: M, Abrasive: S)
Product Information and Prices Stored : Oct 08, 2012 12:54:05
If this Information is Not Updated, Please Check!!!(Non Woven Abrasive Deburr and Finish Wheels 6" x "1 x 1" , Density: 9, Grit: M, Abrasive: S)